Cleasby - On Deck Equipment

Gravely Tractor

Shown with Nieman Roof Remover
with 14" Flat Blade Shown

Tractor Only.....K031000

The most durable and best constructed roofing tractor available. Powered by an 8 H.P. all cast iron Kohler engine. All gear driven for a more mechanically efficient system than conventional v-belt designs. Instant forward and reverse with two speeds in both directions. A single speed P.T.O. that operates the Gravely power broom, dozer blade and the Nieman roof remover with blade attachments. A P.T.O. slip clutch protects the tractor and in case operator strikes a hidden obstruction. Weight: 369 lbs.

Nieman Roof Remover and Blade Attachments

Removes up to 30 squares an hour of built-up roofing and insulation. Equipped with two cutting tools. The wide cutting blade is available in 14" or 30" sizes and is used to remove fiberglass insulation and roofing down to the deck. Cuts roofs much like a roof saw does. Nieman's newest blade, the felt slitting blade, is designed for use with a Gravely Tractor. Weight (roof remover only): 250 lbs.

Gravely Tractor with Nieman Roof Remover..........T00900

(includes 14" flat blade and a Tooth blade)

Nieman Roof Remover only..........................T00950

14" flat blade....................................T01072

30" flat blade....................................T01074

Tooth blade.......................................T01076

Felt slitting blade...............................T01080

Gravely 48" Dozer Blade

Heavy duty curved blade used for moving gravel and tearoff materials. Adjusts for left, right, or straight ahead removal with just one pin. Weight: 110 lbs.

Wheeled Tearoff Bars

Wheeled Tearoff Bars

Heavy duty all steel wheeled tearoff bar. Includes 10" steel flat blade. 10" shingle blade optional. Weight: 42 lbs.

Shown with optional Shingle Blade

Wheeled Tearoff Bars.............................B00150

Optional 10" shingle blade.  Weight: 10 lbs......B00200

Replacement 10" flat blade.  Weight:  3 lbs......B00250

Gravely 44" Power Broom

Rugged gear and chain drive for optimum performance. Tough polypropylene bristles for long wear. Right and left angle positions for windowing gravel. Weight: 250 lbs.


Gravely 44" Power Broom attachment only.........B02450

Gravely 44" brush replacement...................B02550

Gravely Power Broom with Tractor................B02500

Heavy Duty Power Broom

Weight: 230 lbs...B02300

Heavy Duty
Power Broom

Convenient three position control for brush angles that are spring loaded
with gates for positive positioning of brush; straight to right to left.
Equipped with a handle mounted ignition switch, a 5 H.P. IC series
gasoline engine and is self-propelled. Right angle gear drive eliminates
serpentine belt drive and need for tension adjustments of belts.

Roof Saw

Best designed roof saw in the industry! Known for its "Quick Belt Change", belts are changed in minutes by simply loosening T-bolts and letting the hinged belt guard swing down. Belts last longer because they are away from the cutting side and completely enclosed, protecting them from debris, dirt, and dust. Equipped with a straight carbide blade and a Briggs & Stratton 8 H.P. engine. Other blade and engine options are available.














Weight: 215 lbs...S00700

Roof Saw Blades

Straight carbide blade (A).......................S00750

Posa Trac I carbide blade 

(1 straight blade & 1 offset blade) (B)..........S01025

Posa Trac II carbide blade (C)...................S01000

(quad w/ replaceable tips)

Posa Trac II 12" replaceable tips................S01050

Aluminum Feltlayer

Aluminum Feltlayer

"The best felt layer available." Easily adjusts for standard or metric rolls. Holds 10% more asphalt than the competitors. Boasts the lowest loading height for easy loading and maneuvering.

		Aluminum Feltlayer Features
		Lightweight aluminum design.
		Extra strength precision design and lower extruded manifold valve. Valve is made of brass to prevent sticking.
		Easy interior cleaning (radius).
		Splash guard around top cover opening.
		Extra heavy duty square tubing main frame.
		Locking brake unit.
		Easily adjustable manifold flow and felt width.
		Increased visual contact of tar flow.
		All tig welded construction.
		Precision fabricated construction using CNC punching, notching and forming.
		Convenient built-in lift bracket.
		Flip-up roller bar.




Adjustable Feltlayer.............................F00630

Adjustable Feltlayer, insulated..................F00625

Loading Height .........23"  Tank Capacity.......48 gal.

Weight Non-Insulated (empty)....................128 lbs.

Weight Insulated (empty)........................158 lbs.

Rotary Planer

A heavy duty spudding machine built with a balanced fly wheel for minimum vibration and an easy height adjustment handle for maximum adjustability. Has 4 carbide pins for faster spudding and longer pin life. Spuds a 12" wide path. Includes an 8 H.P. Briggs & Stratton engine and a rugged frame with hook up for hoisting. Weight: 220 lbs.


Rotary Planer.....................................S03150

Carbide tip rotary planer blades..................S03300

Carbide blade holder..............................S03340

Mighty Midget Mopper

Mighty Midget Mopper

Large capacity, adjustable mopper comes with a metal chain mop. #6 steel inner screen and two 400 X 8 pneumatic tires. It's low profile balanced design makes this unit highly maneuverable. Used for laying insulation, adhesive application, deck priming, felt application and glazing. Weight: 70 lbs.

Automatic Asphalt
Spot Mopper

Ideal for uniform asphalt application on new and re-roofing jobs alike. Used for roof insulation and base sheet applications as well. Easy to use and no lever to operate.Weight: 85 lbs.

Automatic Asphalt Spot Mopper.....................M01100

8" X 2.5" replacement wheel.......................W01425

       

       Vat Width.....30"    Diameter Spots.....8"

       Capacity...26 gal.   Centers...........24"

Insulation Joint Taper

Insulation Joint Taper

Applies hot asphalt to tape and insulation joint simultaneously or
individually. Weight: 37 lbs.

Insulation Joint Taper............................T00750

Replacement Brush only............................T00800

Replacement Roll only.............................T00775

30 Gal. non-insulated Lo Boy.  Weight: 185 lbs....C00025

30 Gal. insulated Lo Boy.  Weight: 215 lbs........C00050

* Flatbuster tires optional

30 Gal. non-insulated Hi Boy.  Weight: 113 lbs....C00200

30 Gal. insulated Hi Boy.  Weight: 140 lbs........C00150

55 Gal. non-insulated Hi Boy.  Weight: 170 lbs....C00300

55 Gal. insulated Hi Boy.  Weight: 210 lbs........C00250

* Flatbuster tires optional

Hi-Lo Boy Hot Carrier

Hi-Lo Boy

Heavy duty upright rails are drilled to permit easy selection of tank
mounting height. Insulated tanks are insulated with high temp glass
fiber insulation. Precision formed end caps protect the insulation
and help retain heat. Equipped with a braking system.

30 Gal. Hi-Lo non-insulated.  Weight: 181 lbs.....C00360

30 Gal. Hi-Lo insulated.  Weight: 205 lbs.........C00350

55 Gal. Hi-Lo non-insulated.  Weight: 200 lbs.....C00410

55 Gal. Hi-Lo insulated.  Weight: 240 lbs.........C00400

* Flatbuster tires optional

Tank & Trailer

Tank & Trailer

Available with a 55 gal. or 110 gal. tank mounted on a four-wheeled material trailer. Tank has large fill opening and draw off cock. Insulation is protected by an outer skin and steel end caps. Flashing around hopper insures that the insulation stays dry. Front wheel brake is activated when tow bar handle is lowered.




55 Gal. insulated drum.  Weight: 120 lbs..........C00545

110 Gal. insulated drum.  Weight: 205 lbs.........C00550

Mounting channels & rods for 110 gal. drum........C00650

Four Wheel trailer with 400 X 8 tires.

Weight: 150 lbs...................................C00900

Four Wheel trailer with Flatbuster tires.

Weight: 208 lbs...................................C00950

Four Wheel trailer with 18 X 8.50 tires.

Weight: 195 lbs...................................C00850

("Tank & Trailer with Optional 18 X 8.50 tires")

Dumping Felt
& Insulation Cart

Dumping Felt & Insulation Cart Two wheeled material cart (MU Cart) balanced for easy handling. Elevations of the T-handle deposits the load in a single pile or will string it out if the cart is pulled while elevated 400 X 8 wheels are standard, large 18 X 8.50 wheels are an option. Dumping Felt & Insulation Cart with 400 X 8 tires.

Tray sold separately




Dumping Felt & Insulation Cart

with 400 X 8 tires.  Weight: 79 lbs...............C00700

Dumping Felt & Insulation Cart

with 400 X 8 Flatbuster tires.  Weight: 58 lbs....C00725

Dumping Felt & Insulation Cart

with 18 X 8.50 tires.  Weight: 90 lbs.............C00800

Tray for Dumping Felt & Insulation Cart.

Weight: 46 lbs....................................C00750

Four Wheel Trailer

Heavy duty four wheel trailer with 30" X 60" bed (larger custom beds available). Designed to be used individually or hooked together. Mechanical brake makes contact with front tires when tongue is dropped.
(see photo below)




Four Wheel Trailer 

with 18 X 8.50 large tires.  Weight: 190 lbs......C00850

Four Wheel Trailer

with 400 X 8 tires.  Weight: 150 lbs..............C00900

Four Wheel Trailer

with 400 X 8 Flatbuster tires.  Weight: 248 lbs...C00950

Dumping Tray

An extra large (48" X 60") tray designed to fit our popular Four Wheel Trailer. Engineered for fast, easy on/off attachment and fabricated from heavy gauge steel, it's perfect for transporting rock, tearoff trash, insulation, etc. Weight: 165 lbs.

Shown with 4 Wheel Trailer

Utility Cart

Utility Cart

Excellent for handling insulation, felt rolls, buckets, etc. Plus it is designed to carry Cleasby 30 or 55 gal. hot luggers. 400 X 8 tires are standard, Flatbuster tires are optional. Weight capacity is 700 lbs.

Shown with Hot Lugger




Utility Cart.  Weight 160 lbs.....................######

Utility Cart with 30 Gal. hot lugger.

Weight: 265 lbs...................................######

Utility Cart with 55 Gal. hot lugger.

Weight: 300 lbs...................................######

Pack Horse with
Optional Utility Wheels

Maximize your material handling needs with Cleasby's Pack Horse. For use on or off the roof to move rolls of felt, insulation, pallets, etc. Large 18 X 8.50 tires are standard. Maximum weight capacity is 600 lbs.

Shown with Utility Wheels

Pack Horse.  Weight: 120 lbs......................C01065

Pack Horse with utility wheels. Weight: 180 lbs...C01070

Standard Three
Wheeled Gravel Spreader

Used for BUR application. Adjustable gate dispenses a 36" spread of pea gravel up to 3" ballast evenly Standard Three Wheeled Gravel Spreader.

G00500                          Length........46"

Weight......151 lbs.            Width..........5'

Capacity....6 1/2 cubic ft.     Height........36"

Three Wheeled
Manual Ballast Spreader

Used for cold process application and ballast (pea gravel and 4 1/2" ballast). Features dual flip handle. Allows operator to dispense rock from either side. Inset wheels allow for rock to be dispensed without disturbing the previously laid row.



G00575                            Length........73"

Weight......345 lbs.              Width.........40"

Capacity....9 cubic ft.           Height........39"

Three Wheeled
Powered Ballast Spreader

Used for cold process application and ballast (pea gravel and 4 1/2"ballast). Powered by a 5 H.P. Briggs & Stratton engine. Self propelled and easy to maneuver. Inset wheels allow for rock to be dispensed without disturbing the previously laid row.



G00600                            Length........73"

Weight......400 lbs.              Width.........40"

Capacity....9 cubic ft.           Height........39"

Trash Chutes

Made of heavy duty 30" diameter X 4' length tapered plastic. Hardware is bolted instead of pop riveted, a much stronger and more durable alternative. Chutes can be set up in minutes. Each tapered section telescopes into any other section and is fitted with support chains. Just hook section chains above, hoist to roof level and secure to outrigger supports.

Cleasby Trash Chutes are designed to be used with a one or two piece trash chute hopper.

Trash Chute with
Two Piece Hopper




Trash Chutes......................................C02300

One piece adapter plate.  Weight: 60 lbs..........C02450

Two piece hopper with sling.  Weight: 160 lbs.....C02350

Cable sling only..................................C02400



H05350

Gravel Hopper

A must for fast efficient handling of gravel delivered to the roof top by elevator or conveyor. Made of heavy gauge steel with adjustable legs, lift gate with dual handles, and gravel splash plate. Capacity: 32 cubic ft.

"Pivot" Style"
Self Dumping Hopper

Designed to be used with a forklift. Available in five sizes:
(1 yd., 1 1/2 yd., 2 yd., 3 yd., 4 yd.)

		Self Dumping Hopper Features
		All heavy duty steel construction.
		Grease fittings on pivot axles.
		Pivot points reinforced with steel plates for added strength.
		Heavy duty base with fork channels and skids.
		Dropped front for clean dumping.



W02125

One Wheel Wheelbarrow

A basic all around wheelbarrow. Features light weight design with 80% of weight over the wheel for easier handling. Six cubic foot tray and a 400 X 8 pneumatic tire is standard. Weight: 50 lbs.

One Wheel Heavy Duty Wheelbarrow

A heavy duty steel wheelbarrow features a six cubic foot seamless tray
welded to a solid one-inch steel frame for maximum durability. Skid
plate welded to the front frame serves to minimize kick back when dumping.
Comes standard with a 400 X 8 pneumatic tire with a 5/8" bearing. Flatbuster
tire is optional. Weight 60 lbs.




One Wheel Heavy Duty Wheelbarrow..................W01900

One Wheel Heavy Duty Wheelbarrow

with Flatbuster Tire..............................W02075

Two Wheel Heavy Duty Wheelbarrow A heavy duty all steel wheelbarrow. Features two 400 X 8 pneumatic tires with one-inch bearings for maximum stability. Skid plate on the front frame serves to minimize kick back when dumping. A six cubic foot seamless tray is welded to a solid steel frame for maximum durability. Weight: 75 lbs.

Two Wheel Heavy Duty

Two Wheel Heavy Duty Wheelbarrow




Two Wheel Heavy Duty Wheelbarrow..................W02100

Two Wheel Heavy Duty Wheelbarrow

with Flatbuster Tires.............................W02050

C01060

Trasher

A one of a kind cart used for hauling debris away. Offers a rear swivel wheel for easy maneuvering, front dump bars and hoisting eyes. 350 X 4 pneumatic tires are standard. Weight: 275 lbs.

All Speed King mop carts are constructed of heavy gauge steel. A rolled rim reduces mop drag over top edge for longer lasting mops. Carts include a rolled mop cart rest, convenient mop handle holder and standard 6" wheels. Fenders, removable bucket, steel wheels, pneumatic tires. 10 X 1.75 or 10 X 2.75 wheels are an option.




With six inch pneumatic tires (standard).

Weight: 22 lbs....................................C01100

With 10 X 1.75 pneumatic tires.  

Weight: 23 lbs....................................C01200

With 7" steel wheels.  

Weight: 32 lbs....................................C01225

With removable bucket and 10 X 1.75 pneumatic

tires.  Weight: 37 lbs............................C01300

18 Gal. Mop Carts

Square Bucket
with
10 x 1.75 Wheels


With 10 X 1.75 pneumatic tires.  Weight: 49 lbs...C01400

With steel wheels.  Weight: 49 lbs................C01500




With six inch pneumatic tires (standard).  Weight: 32 lbs...C01550

With 10 X 1.75 pneumatic tires.  Weight: 40 lbs.............C01575

With 7" steel wheels.  Weight: 40 lbs.......................C01560

30 Gal. Mop Carts

Square Bucket & Fenders
with
Pneumatic Tires


With pneumatic tires.  Weight 66 lbs........................C01600

With 10 X 2.75 wheels.  Weight 66 lbs.......................C01700


	60% Lighter Than Traditional Foam Filled Tires!
	Weight is a mere 12 lbs. per tire.

	Slick Surface!
	A tread free tire. Eliminates any possibility of picking up unwanted asphalt therefore adding to the weight of the tire. Not to mention, tracking asphalt where you may not want it.

	Never Goes Flat!
	Filled with a lightweight foam core of Endurothane II™ that is molded inside the tire to perfectly conform to the tire and rim. The result is a perfect fit every time.

	Never Rolls-Off The Rim!
	There is never such a thing as a "Roll-Off". This is due to the fact that the Flatbuster is a standard tire on the outside so the wire bead maintains a safe and secure seal on the rim.

	Will Not Slip Or Slide On Moist Surfaces!
	The standard tire is on the ground which eliminates slipping and sliding problems.




400 x 8 Flatbuster Tires with 5/8” bearings.......W01100

400 x 8 Flatbuster Tires with 1” bearings.........W01125


400 x 8 with 5/8” bearings. Weight 7 lbs..........W00575

400 x 8 with 1” bearings. Weight 7 lbs............W00550

400 x 8 w/ special short hub for felt layer.

Weight 7 lbs......................................W00800

350 x 4 for dump trasher. Weight 4 lbs............W01000

18 x 8.50 for 4 wheel trailer. Weight 18 lbs......W01250

10 x 1.75 mop cart wheels. Weight 4 lbs...........W00950

10 x 2.75 wheel for roof saw. Weight 5 lbs........W00975

12 x 300 rear wheel roof saw. Weight 12 lbs.......W01350

350 x 6 Tail wheel for felt layer. Weight 7 lbs...W01200

Rear swivel wheel for Hi-Lo Boy. Weight 11 lbs....W00850

8 x 2.5 wheel for spot mopper. Weight 3 lbs.......W01425

Small 7” for tearoff bar. Weight 3 lbs............W01150

Large 10” for mop carts. Weight 4 lbs.............W01160



No.46LA...P00450

Crack & Joint Filler

Cone-shaped crack and joint filler features drip tight control valve for finger tip control. Material stream flows ahead of operator for repair of expansion joints and pavement cracking.
Capacity: 2 gal. Weight: 6 lbs.



No.46LAL..P00500

Crack & Joint Filler

Cone-shaped crack filler featuring steel leg rest for upright positioning
when not in use. Includes drip tight control valve for fingertip control.
Material stream flows ahead of operator for effective road maintenance.
Capacity: 2 gal. Weight: 7 1/2 lbs.

Sprinkler Pot

Provides uniform sprinkling of light materials. Used for thin patches and dust laying. Large round nozzle features 1/8" diameter holes. Fitted with inlet strainer.
Capacity: 4 1/2 gal.
Weight: 6 lbs.



No.49....P00600

Sheet Pourer

Features 8" vertical nozzle for sheet pouring asphalt. Fitted with inlet strainer.
Capacity: 4 1/2 gal.
Weight: 5 lbs.



No.74....P00750

Strip Pourer

Features 4" nozzle in a horizontal or vertical position for narrow strip pouring. Used for highway maintenance, roofing, or pipeline work.
Capacity: 4 1/2 gal.
Weight: 6 lbs.



No.273T....P00800

Cleasby buckets are uniquely designed with inset bottom and handle punched through the bucket, not attached at the side, so there are no welding points to pull apart. The most durable buckets available. Optional side handles are available for easier pouring.


[A]		[B]		[C]		[D]



[A] Mop Bucket with side handle.  Weight: 10 lbs............B03250

[B] Cleasby insulated bucket with cover.

    Capacity: 6 gal.  Weight: 18 lbs........................B03175

[C] Service Bucket with side handle.  Weight: 5 lbs.........B03350

[D] Drag Bucket with handle.  Weight: 18 lbs................B03000



Mop Bucket 14" X 14".  Capacity: 9 gal.  Weight: 8 lbs......B03200

Service Bucket 12" x 14".  Capacity: 6 gal.  Weight: 4 lbs..B03300